View MC-7832-HA_307950.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
GaAs MULTI-CHIP MODULE
MC-7832-HA
1 GHz CATV 22 dB PUSH-PULL AMPLIFIER
DESCRIPTION
The MC-7832-HA is a GaAs Multi-chip Module designed for use in input stages in CATV applications up to 1 GHz. This unit has low distortion, low noise figure and return loss across the entire frequency band. Reliability and performance uniformity are assured by our stringent quality and control procedures.
FEATURES
* Low distortion * High linear gain * Low return loss GL = 22.0 dB MIN. @f = 870 MHz
ORDERING INFORMATION
Part Number MC-7832-HA Order Number MC-7832-HA-AZ Package 7-pin special with heatsink (Pb-Free) Supplying Form 25 pcs MAX./Tray
Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: MC-7832-HA
ABSOLUTE MAXIMUM RATINGS (TA = +25C, unless otherwise specified)
Parameter Supply Voltage Input Voltage
Note
Symbol VDD Vi TC Tstg
Ratings 30 65.0 -30 to +100 -40 to +100
Unit V dBmV C C
Operating Case Temperature Storage Temperature
Note In case of single tone
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information.
Document No. PG10685EJ01V0DS (1st edition) Date Published October 2007 NS Printed in Japan
2007
MC-7832-HA
RECOMMENDED OPERATING CONDITIONS (ZS = ZL = 75 , unless otherwise specified)
Parameter Supply Voltage Input Voltage Operating Case Temperature Symbol VDD Vi TC 110 channel, Flat Test Conditions MIN. 23.5 - -30 TYP. 24.0 21.0 +25 MAX. 24.5 27.5 +85 Unit V dBmV C
ELECTRICAL CHARACTERISTICS (TC = 30 5C, VDD = 24 V, ZS = ZL = 75 , unless otherwise specified)
Parameter Linear Gain Gain Slope Gain Flatness 1 Gain Flatness 2 Noise Figure 1 Noise Figure 2 Operating Current Composite Triple Beat Cross Modulation Composite 2nd Order Beat Input Return Loss 1 Input Return Loss 2 Input Return Loss 3 Input Return Loss 4 Input Return Loss 5 Output Return Loss 1 Output Return Loss 2 Output Return Loss 3 Output Return Loss 4 Output Return Loss 5 Symbol GL GSlope GFlatness1 GFlatness2 NF1 NF2 IDD CTB XM CSO RLi1 RLi2 RLi3 RLi4 RLi5 RLo1 RLo2 RLo3 RLo4 RLo5 f = 40 to 160 MHz f = 160 to 320 MHz f = 320 to 640 MHz f = 640 to 870 MHz f = 870 to 1 000 MHz f = 40 to 160 MHz f = 160 to 320 MHz f = 320 to 640 MHz f = 640 to 870 MHz f = 870 to 1 000 MHz Test Conditions f = 870 MHz f = 40 to 870 MHz f = 40 to 870 MHz f = 40 to 1 000 MHz f = 50 MHz f = 870 MHz RF OFF (Pin = None) 110 channel, VO = 44 dBmV, Flat MIN. 22.0 0.6 -0.35 -0.35 - - 180 - - - 20.0 19.0 17.5 16.0 10.5 20.0 19.0 17.5 16.0 13.5 TYP. - - - - - - - - - - - - - - - - - - - - MAX. 23.0 1.4 +0.35 +0.85 6.0 6.5 240 -57 -50 -57 - - - - - - - - - - Unit dB dB dB dB dB dB mA dBc dBc dBc dB dB dB dB dB dB dB dB dB dB
2
Data Sheet PG10685EJ01V0DS
MC-7832-HA
PACKAGE DIMENSIONS 7-PIN SPECIAL WITH HEATSINK (UNIT: mm)
45.08 MAX.
3.2 MAX.
38.10.25
8.1 MAX.
4.25-0.35
+0.25
27.5 MAX.
14.85 MAX.
19.050.38
25.40.25 6-32UNC2B 2.540.25 0.510.05
4.00.25
21.5 MAX.
4.190.13
123
5
789
A 6.3 0.510.05 0.38.. A 0.05 2.5
12.9 MAX.
2.620.35
2.540.38
PIN CONNECTION
VDD 5
1 IN
9 OUT
2
3
7
8 GND
10.750.25
Data Sheet PG10685EJ01V0DS
3
MC-7832-HA
NOTES ON CORRECT USE
(1) The space between PC board and root of the lead should be kept more than 1 mm to prevent undesired stress to the lead and also should be kept less than 4 mm to prevent undesired parasitic inductance. Recommended that space is 2.0 to 3.0 mm typical. (2) Recommended torque strength of the screw is 59 to 78 Ncm. (3) Form the ground pattern as wide as possible to minimize ground impedance. (to prevent undesired oscillation) All the ground pins must be connected together with wide ground pattern to decrease impedance difference.
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Pin Part Heating Soldering Conditions Pin area temperature (pin temperature) Soldering time (per pin of device) : 350C or below
Note
For soldering
Recommended Condition Symbol -
: 3 seconds or less
Note The point of pin part heating must be kept more than 1.2 mm distance from the root of lead.
4
Data Sheet PG10685EJ01V0DS
MC-7832-HA
* The information in this document is current as of October, 2007. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above).
M8E 02. 11-1
Data Sheet PG10685EJ01V0DS
5
MC-7832-HA
Caution
GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth.

▲Up To Search▲

Price & Availability of MC-7832-HA

	To Download MC-7832-HA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .